Required Components

Congratulations on installing the patented Gilsulate 500XR!
Installation is not complicated: it is rather quick and easy and does not require a lot of skill. Prior to jobsite start-up you should arrange to have the following equipment and materials delivered to the jobsite. If you have questions about the installation of Gilsulate please call us and we can walk you through your project.

Bitumastic Special coating

Childers CP 79  • 800-231-9541 • www.fosterproducts.com
Carboline 50  • 800-848-4645  • www.carboline.com

Rod type vibrator

1-1/2 – 1-7/8 head  & 115V power supply
Wacker  • 800-770-0957  • www.wackergroup.com

Fiberglass/Mineral Wool Pipe Insulation

Handles expansion at loops & bends.
Delta®-PF • 800-874-7625 • www.deltainsulation.com
JM Micro-Lok® • 800.654.3103  • jm.com

Fiberglass Rope/mechanical seals

Wall Entries/Risers
Flexicraft  • 800-533-1024  • www.flexicraft.com
Link Seal  • 800-423-2410  • www.linkseal.com
Newtex • 800-836-1001 • www.newtex.com

Obtain the following items from any hardware store:

Forming Materials, Temporary spacers & Supports.
Forms –  5/8” x 4’ x 10’ Drywall – cut size will vary.
Spacers – 3/4” x 4” x 8’ Drywall – cut size will vary.
Supports/Rebar- 1/2” – 3/4” – appropriate length to support side forms.
Supports/Wooden- 1”- 2” Wooden Stakes, 2” Drywall Screws, Screw Gun.

Tools Required

Utility Knives Small Sledge Hammer 2” paint brushes.
Round Nose Shovels Square Nose Shovels Trowels.

Miscellaneous Items

Structural steel and concrete for anchors, guides & temporary pipe supports.
Dust Mask 3M 8710.
Tyvek Breathable Suits – optional depending upon site requirements.